Mobile Decoders

1 Amp Mobile Decoder with FX functions and 9pin plug Retired in 1997

Digitrax 9 pin harness with no-solder connections for Athearn Standard Locomotives This item was retired in August 2012 due to the unavailability of connector clips for building this product.

1 Amp (1.5 Amp Peak) Mobile DCC Decoder Please use 3 step speed tables for all DZ121 & DN121 Series Decoders, because of size constraints in their processors, they do not support 28 step speed tables. Non-directional headlights are NOT available on DN121 Series Decoders. Retired in 2003

1 Amp (1.5 Amp Peak) Mobile DCC Decoder Please use 3 step speed tables for all DZ121 & DN121 Series Decoders, because of size constraints in their processors, they do not support 28 step speed tables. Non-directional headlights are NOT available on DN121 Series Decoders. Retired in 2004

1 Amp (1.5 Amp Peak) Mobile DCC Decoder Please use 3 step speed tables for all DZ121 & DN121 Series Decoders, because of size constraints in their processors, they do not support 28 step speed tables. Non-directional headlights are NOT available on DN121 Series Decoders. Retired in 2004

1 Amp N Scale Mobile Decoder for Kato N RDC Retired in 2007

1 Amp Digital Command Control Mobile Decoder Retired in 1997

1 Amp Plug N' Play DCC Mobile Decoder for E-R Models N-scale Baldwin Sharknose Loco Retired in 2003

1 Amp Board Replacement DCC Mobile Decoder for KATO N-scale SD-80/90 MAC Locomotive Retired in 2003

1 Amp Wired Mobile Decoder, 4 Functions Technical Note: If using DH142, DN142, DN141K2, DN149K2 series decoder, when F1 is set up for FX, F2 must also be set up as FX (It can’t be used as standard on/off function.) If you want to use a combination of FX & standard on/off functions, please use F1 as the standard on/off function and F2 as the FX function. Retired in 2006