KB594: Is Digitrax signaling and detection equipment compatable with other DCC systems?

This article was last updated on June 6, 2012, 7:30 p.m. | Print Article | Leave Feedback

Q: I have a Lenz Set 100 and was wondering if I can use my DCC system and use the Digitrax signaling and detection components. What about other DCC systems?

A: Yes, Digitrax detection and signaling will work with any DCC system.  You will need to install a LocoNet network for the LocoNet components to communicate with each other and use a PR3 or MS100 to interface with a computer running software such as Railroad and Co. 

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.