Click here for the
PDF version of the Super Chief Manual
Note: Digitrax Starter Sets do not include mobile decoders
or power supplies. There are a wide variety of DCC decoders
available today and some are made to fit specific locomotives.
Some decoders have more features and cost more money and some
are less expensive with fewer features. Your Digitrax authorized
dealer will be able to assist you in choosing the “right”
decoder for your layout. Click here to visit our mobile
and stationary decoder
selection pages. There are many different power supplies that
you can use to power your Digitrax system and you may already
own an appropriate power supply so rather than force you to
purchase a power supply you may not need, we leave that decision
up to you and your dealer. Click here to learn about Digitrax
power supplies that are available.
DT400 Super
Throttle and DCS100 Command Station Offers:
-
User interface makes DCC simple.
-
Dual throttle controls.
-
Full numeric key pad.
-
Simplified 4 digit addressing.
-
Easy address browsing and selection.
-
User friendly text messages to guide you.
-
Click encoders for smooth speed control.
-
Multi-line LCD display puts all information at your
fingertips.
-
Infra-ready out of the box. Radio version available.
-
Ready for transponding and cab signaling.
Big System Capacity for Big Layouts
Over 9000 Locomotive Addresses
-
Address 00 for operation of one or more locos without
decoders
-
Two Digit Addressing is easy to use. (Address 01-127)
-
Four Digit Addressing lets you use the road number
of your engines as their addresses. (Address 0128-9000+)
5 Amps of Power to Run More Trains
Function Control
-
Control 14 functions-F0 through F12.
-
Function 2 is a special non-latching key that can
be used to sound the horn for as long as the key is
held down.
-
Constant brightness lighting. Headlights can be directional
or independently controlled (depending on decoder capabilities).
Two DCC Outputs are Better than One!
Decoder Programming
Consisting
-
Universal consisting, Digitrax preferred method. Allows
ALL locos to be consisted prototypically, even analog
locos.
-
Advanced consisting and Basic consisting, too!
-
Nested consisting where consists can be consisted
together.
Stationary Decoders, Turnout Control & Turnout Position
Reporting
-
Access to stationary decoder control for turnouts
and other devices.
-
DT400 reports turnout position based on last command
sent.
-
Control 999 stationary decoder addresses.
Routes
- Turnout List/Route capability to simplify complex yard
operations.
Customizable System Options
-
User adjustable voltage trim.
-
Turn audible warnings on or off.
-
Set up purging options.
-
Multi-format command station mode (Motorola Trinary
Format).
-
DCS100 is the most flexible command station on the
market.
Expandability
-
Super Chief is just the beginning for large, complex
layouts that emphasize prototypical operations.
-
With LocoNet you can add more boosters, throttles,
power management, detection, transponding, signaling
and much more.
-
To expand Super Empire Builder for all the capabilities
of the Super Chief, simply add a DCS100.
-
If you want to add another throttle at the same time,
then it makes sense to add an entire Super Chief set
and take advantage of the value pricing offered on Digitrax
sets.
|
