No Charge Utility Programs:

The following utility programs are available for use with Digitrax products at no charge.  You will need a PC to run the programs.  You will also need a PR3 or MS100 or similar hardware (such as LocoBuffer) to connect the PC to LocoNet. 

All of these utilites are available in zipped format along with a Readme.txt file are available here (right-click and choose 'Save-As' or 'Save link/target As' to save to your hard drive and unzip* from there)

These utilities are provided on an as-is basis for advanced users with an IBM PC compatible Windows based machine configured to work with this software, and the ability to perform tasks outlined in the readme files associated with each utility.

Digitrax Tech Support is not able to diagnose issues related to your PC’s operating system, hardware, configuration or other possible problem areas that may prevent these utilites from running correctly on your computer.

Available Utilities:

DigiIPL– A PC-based program that allows you to update firmware in some Digitrax products is called DigiIPL.  IPL stands for Initial Program Load. Products listed below in the 'Available Firmware Updates" box have updates available. Click here for DigiIPL and instructions.

DigiGroupSetup - This program allows convenient Duplex Group setup for any UR92 on LocoNet.  Click here to download DigiGroupSetup and instructions.

DigiMon - This program allows monitoring of LocoNet message traffic and operations. Click here to download DigiMon and instructions.

		Rev 11 - As per user requests, the System "Track IDLE" state (where all mobile decoders freeze movement on the layout) is now indicated on a DT402 type throttle by default as a flashing dot between the F11 and F12 function indicators at the top right of the screen. Additionally, an extra "noIDLSho" Option customization step has been added in the DT402 "Throttle Option" setup menu, after the "DuplexRF" option. If a user chooses to customize this new "noIDLSho" option, changing this with the + key from the factory default on to "OFF", then the text display will now also flash "Trk=Idle" when the system is in the Track IDLE state. This update can be installed using the DigiIPL utility above. 'Right Click' here to download the .DMF file. (right-click and choose 'Save-As' or 'Save link/target As' to save to your hard drive.)

*A Free version of 7-zip is available here.