This Atlas Snap-Track layout appears in the Atlas Model Railroad Company's book "Beginner's Guide to HO Model Railroading". It includes a reversing section which can be controlled with a Digitrax AR1. DC Control For DC operation, Atlas specified an Atlas Controller (for the reverse loop), two Atlas Selectors (to control eight track segments) and seven controllers for the railroad's turnouts. DCC Makes Things Simple With DCC, the wiring of this railroad is considerably simpler. Because each locomotive has a unique address, the section insulated gaps and the two Selectors are not necessary. Likewise, the Controller is replaced with the AR1 ...
My layout is the Apex & Hypotenuse design, from the Atlas design. I was wondering where would you suggest I wire the AR1. We remember this layout design, if for no other reason than its ingenious complexity. This railroad initially appeared in the Custom Line King Size Plan Book - H0 Railroads You Can Build, originally published by Atlas Tool in 1966. This book was yet another collaboration between the late John Armstrong and illustrator Thaddeus (Tad) Stepek. This railroad must have required a certain level of dexterity by the operator since the reversing segment is actually two different return ...