PS514 70W AC Power Supply
PS514 70W AC Power Supply, For use with Digitrax 5 Amp Starter Sets and accessories in multiple track scales and utility supply usages. Recommended by Digitrax for powering 5 Amp versions of Digitrax Super Empire Builder Xtra and Super Chief Xtra Sets & accessories.
Note: PS514 should not be used with Zephyr or Zephyr Xtra Starter Sets. The PS314 supplied with the Zephyr Xtra or equivalent supply should be used with Zephyrs.
Note: PS514 should not be used with DCS200 or 8 amp starter sets. These should use the PS2012 or other power supply that can supply 8 amps.
High efficiency power supply
7 selectable output voltages, 12V, 13.8V, 15V, 16.8V, 19V, 20V, 24V DC output
For use with Digitrax 5 amp Starter Sets and accessories in multiple track scales and utility supply usages
Slide switch selectable
Supplied with US to IEC, 2-pin grounded cord set
Meets MEPS III "green" efficiency standards
CE for EM compatiblity and IEC 60950 safety requirements
Full galvanic isolation of output voltage from AC input
RoHS environmentally sensitive manufacturing
Compact and lightweight
Power indicator light
Over current and overload protected
Use the BLUE adapter plug to connect to the provided 2 wire cable for the DCS100 and DB150 Command Station/Boosters.
Replaces the PS515
- For Use With
- 5 Amp Starter Sets, boosters and command stations and accessories.
- Not for use with
- 8 Amp Starter Sets, Command Stations and Boosters
- Original Release Date
- No Worries Warranty (read more)
Digitrax gives a one year "No Worries" Warranty against manufacturing defects and accidental customer damage
on all Digitrax command stations, boosters, throttles, decoders, power supplies and layout control devices.
That's it! A simple, straightforward warranty with no tricky language!
Repairs are simple, too! Just fill out the form and return your items directly to Digitrax for repair. We'll get them fixed up and return them to you as quickly as possible. Please DO NOT return items for repair to the place of purchase.
Make Sure Your Item Needs To Be Repaired Before Sending It To Us! Many of the units we receive for repair do not need any repairs at all. Before you send any units for repair, please take a few minutes to review our Support Options.
1. Check the Tech Support Depot for help. Search for troubleshooting guides.
Please give your name, e-mail address, phone number and when is the best time to contact you. Please give a complete description of the issue you are having.
Many problems are easily resolved by contacting Digitrax Tech Support without having to send in your unit.
Note: Some Digitrax products are no longer repairable due to unavailability of repair parts. Un-repairable items will be returned to you at no charge with no repairs made.
Please Note: Most of our products are not user serviceable. If a defect or accidental damage occurs, return the unit directly to Digitrax for service. Please do not open the Command Station/Boosters (except for making voltage adjustments or changing batteries per the manuals). Please do not remove the shrink wrap protective sleeves from the Digitrax decoders. Shrink may be peeled back to expose pads for adding function wires.
Accessory items that are not covered under the No Worries Warranty carry a 90 day warranty against defects in materials and workmanship. This includes speakers, wire, cables, battery covers, etc.
Intentional damage and customer modifications outside the scope of instructions provided with the product are not covered by this warranty.
Do NOT send a locomotive with your decoder. If a locomotive is sent to Digitrax, Digitrax will ship the entire package back, unrepaired.