BXP88 LocoNet Occupancy Detector, 8 Detection Sections with Transponding and Power Management

BXP88 makes adding detection and transponding to your layout easier than ever.  No more complicated wiring!

  • DCC Occupancy Detection supports up to 8 Detection Sections letting you know when equipped rolling stock is in a detection section on your layout.
  • One Transponding Zone per Detection Section lets you know the location of transponder-equipped locos or rolling stock.
  • Intelligent  Automatic  short-circuit and over-current  power management for each Detection Section, improves reliability by avoiding most booster fault shutdowns.
  • Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information.
  • Detects any powered locomotives in a Detection Section.
  • Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
  • Detects rolling stock equipped with resistor wheel sets.
  • Plug and Play with Digitrax DCC systems with automatic Railsync polarity detection.
  • LED output headers for front panel indication of Detection Section occupancy, Transponding, and power status.
  • Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles.
  • 3 Amp capacity per Detection Section , 8 Amp total unit capacity.
  • Automatically updates status at track power on.
  • Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track.
  • Firmware update capability via IPL over LocoNet.

Product Support

Supporting Documentation

Tech Support Depot

Downloads