Product Support for: Starter Sets -> Empire Builder (EB)

View the Product Page for the EB

The Empire Builder starter set was introduced as an intermediate level starter system. The set included a DB150 Command Station/Booster, DT100 throttle, a Mobile Decoder, and a LT1 LocoNet Tester.

The Empire Builder was also available in a Simplex Radio Equipped set.

Produced from 1998-2000

1 Articles Found for EB

KB1062 SDH164K1 Function Connections

Series 4 decoders like the SDH164k1's will conform to the 10-pin wiring diagram   Function pads for F1 and F2 are located on the SDH164K1 boards on opposite sides by the front headlight. Functions 3 and 4 are located on the 10-pin wire harness, with the Brown wire being the F3 negative and the Yellow wire being the F4 negative.  F3 and F4 functions have a common positive connection to the solder point labeled in the middle of the board.     The common LED sizes used are 3 mm and 5 mm.