Product Support for: Throttles -> CT4 Quad Throttle (CT4)

View the Product Page for the CT4

Digitrax first throttle as part of the Challenger Set.

Discontinued in 1998 this product is no longer able to be repaired.

CT4 throttles can ONLY be used with a Challenger Set. They were not replaced with another similar product when they were discontinued.

3 Articles Found for CT4

KB797 Challenger Starter Set Overview

Challenger was Digitrax' first commercially produced system.  It was manufactured from 1993 to 1998.It included:A CT4 analog throttle that controlled 4 addresses.  These were color coded.A DB100 command station/booster.A decoder (either HO or N scale).The CT4 throttle is the only throttle ever manufactured by Digitrax that could not be used on other Digitrax systems.

KB898 CTX/CTY Throttle Operation

CTX/CTY throttles allow you to have up to 4 separate throttles controlled by 4 different operators rather than 4 throttles controlled by one operator as in the CT4 that comes with your Challenger Set. Digitrax provides these instructions so that you can build your own throttles to your own specifications. You are free to choose any knobs, buttons & cases you like, the ones on the parts list below are just suggestions. These throttles give you the option of expanding your operations cost effectively. The CTX throttle controls speed & direction for one train in the operating group & can ...

KB948 Retired Digitrax Products Continue To Work With New Products on LocoNet

I own a Digitrax Starter Set that is now discontinued. Can I still use it and can it be upgraded?LocoNet lets you use all Digitrax LocoNet components in your system no matter when you purchased them. You can continue to use what you already own with new components as they become available. Note:  This will work with all starter sets except for Challenger. If you have a Challenger Set and you want to move up, the best thing to do is to purchase one of the new sets and use the DB100 series booster that came with your Challenger as ...