KB745: DT402 & DT400 Series Throttle CLOC, "c" Key-Clock Display or closed

This article was last updated on June 2, 2011, 7:54 p.m. | Print Article | Leave Feedback

The CLOC, "c" Key is used to toggle between displaying and not displaying the current fast clock time. It is also used to issue c (closed) commands when the throttle is in Switch mode.

In the case of turnout control:

c=closed, when a "c" command is sent, the turnout is set for the main line with routing through the straight leg of the turnout.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.