The BT2 was a simplified throttle with limited capability designed to get people up and running quickly.
BT2 "Buddy Throttle" was discontinued in 1999.
As of 11/28/2005 it is no longer repairable due to unavailability of repair parts.
The BT2 throttle was manufactured between 1995 and 1999.
Keep Alive Power Jack (For DT200 & BT2) When the layout is powered down we recommend that you change the DT200 that is running as the Command Station to Advanced Throttle mode so it can power down and conserve its battery. Do this by pressing Run/Stop & Left Arrow keys together. All other Advanced Throttles on LocoNet will power down and show "idLE" when the LocoNet bus wires (pins 3 and 4 of the RJ12 plug) fall below +5Volts for more than 1/4 of a second. If the RailSync lines on LocoNet (pins 1 and 6 of the RJ12 plug) ...