KB87: DT400 series Loco Key

This article was last updated on Jan. 9, 2012, 3:02 p.m. | Print Article | Leave Feedback

The LOCO Key is used for selecting loco addresses on to the throttles so that the address is controlled by the throttle.

Sometimes people call this “assigning locos to throttles.”

DT100, DT200, & DT300 series throttles used the SEL or SET/SEL Keys for this throttle task.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.