KB761: DT400 Track Power On-Off-Stop Indicator

This article was last updated on May 25, 2011, 5:42 p.m. | Print Article | Leave Feedback

The DT400 display LCD includes a small star shaped dot which indicates the status of the track power.



No indicator = System track power is OFF (Press PWR followed by N-)

Indicator On Steady = System track power is ON (Press PWR followed by Y+)

Blinking Indicator = System is in “STOP” and track power is ON (Press PWR followed by Y+ and Y+ again)

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.