KB732: DT402 & DT400 Series Throttles - Emergency Stop (Entire Layout)

This article was last updated on June 12, 2011, 12:29 p.m. | Print Article | Leave Feedback



To stop everything on the layout, press the PWR Key followed by the N - Key while the track power is on. This will turn track power off and will cause all locos to stop.

Press the PWR Key followed by Y + Key again and the locomotives will start running again at the same speed they were running prior to STOP mode. To exit PWR mode, press the PWR Key or the EXIT Key.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.