KB711: UT4 - Steal A Locomotive Address

This article was last updated on July 24, 2011, 12:58 p.m. | Print Article | Leave Feedback



Stealing, or "sharing" is defined as acquiring control of a loco address that is being used by someone else on another throttle. To ‘Steal’ a loco:

1. Unplug the UT4 from the LocoNet port.

2. Dial up the address of the loco you want to steal.

3. Press and hold the ‘STEAL’ key while plugging the throttle into the LocoNet jack. Note: To steal or dispatch another loco, you must unplug the UT4 and repeat the above sequence.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.