KB710: UT4 - Dispatch A Locomotive Address

This article was last updated on July 24, 2011, 1:02 p.m. | Print Article | Leave Feedback



Dispatching is the process of releasing a loco so that another user can take control of it.

To release, or dispatch, a loco under current UT4 control:

1.
Unplug the UT4 from the LocoNet port.

2. Press and hold the DISP (Dispatch) key.

3. Plug the throttle back into a LocoNet port.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.