KB430: DT400 - Strange Locomotive Lights

This article was last updated on Jan. 20, 2012, 3:17 p.m. | Print Article | Leave Feedback

The headlights of my locomotive aren't acting properly.

If you can’t control the operation of the lights in your locomotive with the DT400 (in default 128, or 28 speed step mode), be sure that the decoder is programmed in advanced 28 speed step mode.

Do this by programming CV29 with a decimal value of 06.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.