KB274: What Voltage on Prog A & Prog B?

This article was last updated on Jan. 16, 2012, 4:59 p.m. | Print Article | Leave Feedback

I would like to know what the output voltage of PROG A & PROG B terminals should be on my DCS100 Command Station.

Under normal circumstances, there will be no voltage present across PROG A & PROG B.

When the DCS100 is actually programming a decoder, there will be brief bursts of voltage up to 12 Volts.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.