Overview: Broadway Limited has issued a new line of H0-Scale locomotives called "Blueline". These locomotives are equipped with sound decoders that can be operated in a conventional Direct Current environment. They also are fitted with an 8-pin DCC Medium plug to allow for conversion to a DCC operating environment. Among other decoders, Broadway Limited recommends using our DN143IP mobile decoder for this purpose. Converting these locomotives is simple, but programming a 4 digit address can be a challenge. BLI has a support page which indicates that changing the locomotive address and other CV's can be done in OPS Mode (also ...

OPS Mode Programming Soundtraxx Tsunami Sound Decoders      This article was originally written for Soundtraxx Tsunami decoders.  It will also work for other manufacturer's sound decoders.   The individual CVs that make up an address will need to be programmed individually. These CVs are AD1, CV17, CV18 and CV29. AD1 is the Primary (short address) Default 03, Acceptable Values 1-127 CV17, CV18 are the two CVs that make up the Extended (long address), Acceptable Values 128 - 9983 CV29 is for Decoder Configuration. Values are 06 for 2-digit and 38 for 4-digit addressing. There are many other values that ...

I have a Broadway Limited Import diesel locomotive equipped with factory DCC and Sound. Every time I turn on my Digitrax Zephyr DCS50 the engine starts to short out. It begins to slow down and then jerks a little and sometimes it stops completely. My Zephyr shows a line of flickering zeros across the dial and the engine decoder number even flickers on and off at times. I have checked all terminal connections and for foreign matter on the track but have not had any success in solving the problem.I have taken all cars off the track to make sure ...

Your DZ143ps decoder has been suggested for my Broadway Limited Blueline PRR J1a. I want to install a Seuthe smoke generator (#100 10-16v,120ma), which was recommended. I don't want to connect it directly to the track power because it will run all the time. Is there a way to connect it to DZ143PS so I can turn it on and off? Yes. The DZ143 series have a total of four function outputs, two are for the front and rear headlights and two are for additional functions. F1 controls the green wire output of the decoder, F2 controls the purple wire ...