Product Support for: Mobile Decoders -> 1 Amp Board Replacement DCC Mobile Decoder for KATO N-scale SD-40 Locomotive (DN149K2)

View the Product Page for the DN149K2

1 Amp Board Replacement DCC Mobile Decoder for KATO N-scale SD-40 Locomotive

Retired in 2003

2 Articles Found for DN149K2

KB935 CV49-CV56 - FX Special Effects

Decoders with FX function features have 4 user configurable, independent special effects generators. All current production Digitrax Decoders use FX3 functions so this article is not applicapable to these decoders. CAUTION: Decoders with FX3 function generators use different CVs to control the decoder outputs. All current production Digitrax decoders use FX3 function CVs. Before using these CVs to program your decoders make sure that they are FX and not FX3 decoders.The Real FX effects are set up by programming CV values as described below.F1/F2 NOTE: If using DH142, DN142, DN141K2, DN149K2 series decoder, when F1 is set up for FX, ...

KB888 Installation of Digitrax Decoders in HO Scale Atlas RS1, RS3, RSD4/5

Many thanks to Bob Dattore for this application note!This app note details using a DN142 decoder for the installation.  This decoder is no longer in production but the following decoders would work as well:  DN135D, DN163, DZ123, DZ125, DZ143.  Any decoder that is small enough to fit could be used.The Problem:  Atlas RS1's (and RS3's & RSD4/5's) are hard to install Digitrax decoders in. There is no easy drop-in or light board replacement with back-emf capability.I have installed several Atlas Dual Mode decoders in these popular hard to fit narrow, low hood diesels with ease, by replacing the original light ...