KB594 Is Digitrax signaling and detection equipment compatable with other DCC systems?

Q: I have a Lenz Set 100 and was wondering if I can use my DCC system and use the Digitrax signaling and detection components. What about other DCC systems?A: Yes, Digitrax detection and signaling will work with any DCC system.  You will need to install a LocoNet network for the LocoNet components to communicate with each other and use a PR3 or MS100 to interface with a computer running software such as Railroad and Co. 

KB866 DZ121 - Compatibility with Easy DCC, MRC or Lenz

The DZ121 was discontinued in 2002.  There were some interoperability issues with Easy DCC, MRC and Lenz.  The exchange offer is no long valid.  This article is still published for reference only.At that time, Easy DCC, Lenz and MRC users could return DZ121's to Digitrax for no charge replacements that will work on their systems. There was no reason for Digitrax, Wangrow or NCE users to replace any DZ121 decoder unless they wre having problems.The text at that time:For Easy DCC and Lenz users who are having problems: To determine whether your DZ121 should be returned, read back CV07. A ...