Athearn N-Scale Locos

What Digitrax decoders work in the new Athearn N scale FP45? We recommend the DN163K1C, following the procedure below. One of our editors was able to successfully install both the Digitrax DN163K1B and DN163K1C decoders in the unit. We have determined that the chassis design requires that the decoder be installed backwards. The only problem this poses is that one additional step has to be taken when programming. Both the DN163K1B and DN163K1C decoders are the same footprint with the exception of the LEDs. The DN163K1B has T-1 3mm LEDs and DN163K1C has surface mount LEDs. When the K1B version ...

The Athearn N-Scale P59PHI was not designed for a plug 'n play or board replacement installation therefore, a wired installation will be necessary. This installation is straightforward if you follow the instructions provided below. There is plenty of room inside the locomotive for this installation. See the Digitrax Decoder Selector on our home page to determine which current production decoder is recommended for this installation. Athearn N-Scale P59PHI Installation Instructions for Digitrax Decoders:1. Remove the locomotive's shell. Note which end of the frame is the front and which is the back.2. Remove the light board that is installed on the ...