KB813: DS64 - Connecting to LocoNet

This article was last updated on May 24, 2011, 6:57 p.m. | Print Article | Leave Feedback

DS64 can be used as a LocoNet device.

The two RJ12 sockets (above, left) on the back of DS64 are LocoNet Ports for connecting your DS64 to LocoNet.  Either can be used to connect to LocoNet, with the other being used to connect to other LocoNet devices.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.