KB564: DT402 or DT400 Series Throttle -Select a Locomotive Address to Run

This article was last updated on Aug. 13, 2011, 1:26 p.m. | Print Article | Leave Feedback

Selecting a locomotive address to run on your DT400

Place the locomotive you want to run on the track.  Turn the throttle knob you want to run a loco on slightly counter clock-wise letting the controller know you want to address that side.

Press the "LOCO" key

Select the address of the loco by entering it using the numeric key pad.,

4. Press the "LOCO" key to complete address selection.

Was this article helpful? Send us feedback!

Questions or Comments on this article? Please visit helpdesk.digitrax.com and submit a ticket. Please reference the KB article number in your ticket.