KB558: AR1 with Two Power Districts

This article was last updated on May 8, 2012, 3:16 p.m. | Print Article | Leave Feedback

Q: I want to use the AR1 for a reverse loop between two different power districts (i.e. different booster for each connected track). Is this possible or do I need to make a special wiring set-up to do this? S

This diagram shows how to do this

The usual rules apply, the AR1 track section must be longer than the longest train you will run.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.