KB320: DCS100 - Net Indicator

This article was last updated on Jan. 18, 2012, 12:56 p.m. | Print Article | Leave Feedback

The NET indicator is a red LED that displays information about what the DCS100 sees on LocoNet.

When your layout is wired correctly and LocoNet is operating properly, the NET indicator will be on and it will flicker off any time a good LocoNet message is detected by the DCS100.

The table below explains the patterns you will see for this indicator.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.