KB163: Using Broadway Limited Locomotives with Digitrax - Function Controls F9-F12

This article was last updated on Jan. 30, 2012, 3:20 p.m. | Print Article | Leave Feedback

Function Controls F9-F12

Some Broadway Limited Locomotives use Functions F0-F12 when running in DCC mode.  In some cases F9-F12 do not respond properly.  To remedy this problem, simply reset the locomotive to the factory default setting per the Broadway Limited Instructions you received with your locomotive.

Note:  F9-F12 are accessible on the DT400 throttle when used in conjunction with the DCS100 command station.

Was this article helpful? Send us feedback!

Questions or Comments on this article? Please visit helpdesk.digitrax.com and submit a ticket. Please reference the KB article number in your ticket.