Series 4 decoders like the SDH164k1's will conform to the 10-pin wiring diagram   Function pads for F1 and F2 are located on the SDH164K1 boards on opposite sides by the front headlight. Functions 3 and 4 are located on the 10-pin wire harness, with the Brown wire being the F3 negative and the Yellow wire being the F4 negative.  F3 and F4 functions have a common positive connection to the solder point labeled in the middle of the board.     The common LED sizes used are 3 mm and 5 mm.

I have several old brass locos and they have Pittman motors. I have tried DH163 Decoders and blown two. I believe that they draw excess current that exceeds 1.5amp cont. Is there an HO mobile decoder with the same size physically as DH series, but has higher current ratings? Suggestions? While it is possible that the motor may be drawing too much current, it also may be possible that the motor brushes are not isolated from the frame of the locomotive. It also would be helpful for you to determine the stall current of the locomotive to see if the ...

My sound decoder has a capacitor, why do I need a PX112? The capacitor that came with your Digitrax sound decoder is designed to hold up sound operation in the presence of brief power interruptions.  It is not designed to keep the locomotive’s motor and lights running.  Our ears are very sensitive to sound interruptions so, the capacitor on your sound decoder will prevent most of these drop outs on average quality track.  Most people don’t even notice the small pauses in a locomotive’s movement and the small flashes of the lights when the track power is interrupted.  If you ...

Do you have a reference for wiring Proto 2000 older geeps with a decoder (not necessarily sound)? We actually have several Life-Like Proto's sitting around for conversion to DCC, including an older GP-18, older FA's and such that date back to the days when DCC was just a twinkle in AJ's eyes. Overall, converting these locomotives will be fairly easy but there are a few things to watch for. Make sure that the decoder has enough capacity to match the current demands of the locomotive mechanism.  You must measure the stall current of the locomotive to determine this.   Make ...