Product Support for: Mobile Decoders -> 1 Amp Z / N / HO Scale Wired Mobile Decoder (DZ126)

View the Product Page for the DZ126

Fits Many Z, N and HO Scale Locomotives

2 Articles Found for DZ126

KB887 Digitrax Decoder Installation For PROTO 2000 E8/E9 in HO Scale

This installation procedure is for the DIGITRAX DH166/DH126 decoder. Alternatively, you can use a Digitrax DN166 in this installation. If you use the DN166 the installation will require fewer engine modifications because of the smaller physical size of the decoder.Note any decoder of smaller physical size can be used in this installation.  DN136D, DN166, DZ126, DZ126, DZ146 are all possibilities. After removing the shell from the locomotive chassis, note the color and location of each of the various wires.  All connections must be soldered with rosin core solder and insulated with shrink tubing.We will locate the decoder in the forward ...

KB159 Lots of Locomotives, Few Operators

  My layout is in N scale, with an 85 foot double track main, a 12 track storage area, small yard, and engine facility. The layout measures 10 X 14 with two helices. There are a total of 34 engines, many of which are with their trains in the storage area. All of the already made-up trains (11) have two or three engines on them, ready to be brought up via a helix to run on the railroad. Currently, the road is divided into six parallel blocks (DC); 12 blocks in all. In the future, I plan on adding a ...