Supporting Documentation


Product Support for: Detection & Signaling -> DCC 4 Block Occupancy Detector (BD4N)

View the Product Page for the BD4N

Low-cost, High-sensitivity DCC block-occupancy detection.

1 Articles Found for BD4N

KB497 BD4 - Connecting to an SE8C

  Connecting BD4 to an SE8C?The BD4 is a block occupancy detection device designed as an add-on device that can take advantage of the LocoNet hosting capability of the SE8c signal decoder.   It is connected this way: The installation of a BD4 is relatively simple. Looking at the BD4, you will find a 5-point terminal block on one end and two (LED1 and DS1) 10-pin (5x2) headers on the other. There are three termination areas: a) The 5-point terminal block (left) is for the interconnection between the rail power source and the rails. b) The LED1 10-pin header is ...