KB769: DT402 & DT400 Series LCD Loco Icon

This article was last updated on May 24, 2011, 9:16 p.m. | Print Article | Leave Feedback

On The DT400 and DT402 series throttles, the L & R Loco Icons are used to indicate whether an address is available for selection.

A blinking loco icon means that the address is available for selection and a steady loco icon means that the loco address is currently selected or in use by another throttle.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.