KB643: DT300 - Track Power, Tetherless & Cab Signaling Displays

This article was last updated on July 31, 2011, 2:25 p.m. | Print Article | Leave Feedback

Track Power Indicator

This very small star shaped dot located just above the bar graph display in the LCD on the right side indicates the status of the track power.


No indicator = System track power is OFF
Indicator On Steady = System track power is ON
Blinking Indicator = System is in “STOP” and track power is ON



Tetherless Indicator

The tetherless indicator shows when your throttle is using either infrared or radio communications.

L and R Semaphores-Cab Signaling

The L and R Semaphores are used when cab signaling is implemented on the layout.
 
The L and R Semaphores will display the following:

Was this article helpful? Send us feedback!

Questions or Comments on this article? Please visit helpdesk.digitrax.com and submit a ticket. Please reference the KB article number in your ticket.