KB637: PR1-Setting up Mars Lights

This article was last updated on July 31, 2011, 2:51 p.m. | Print Article | Leave Feedback

Setting Up a Mars Lights with the PR1

To program the decoder for Mars Light or other "single" output applications, follow these steps:
1. Go to the Digitrax Decoder Programmer
2. Select FX Set up
3. Choose the function that you want to be the Mars Light
4. Select "Mars Light"
5. Click "OK"
6. When you are back in the main screen click "Send"

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.