KB512: DS54 - One Button Turnout Application

This article was last updated on Sept. 3, 2011, 2:11 p.m. | Print Article | Leave Feedback


How to Configure the DS54 for one-button turnout control

The local buttons, throttle, or any other turnout control device connected to the LocoNet can control the DS54 output when the DS54 is connected to the rails.

The following drawings indicate the general wiring schematic for a one-button control of a turnout using either a Dual Coil (upper) or slow motion (lower) switch machine.

The following two charts indicate operating criteria and CV settings for one-button turnout control.


Was this article helpful? Send us feedback!

Questions or Comments on this article? Please visit helpdesk.digitrax.com and submit a ticket. Please reference the KB article number in your ticket.