KB223: Walthers Turntable (933-2829)

This article was last updated on Jan. 12, 2012, 3:42 p.m. | Print Article | Leave Feedback


I have just purchased a Walthers 90' turntable that is DCC ready [sic].

How do I connect this?

It appears to have a LocoNet connector.

Any help would be great.

Walthers manufactures two different turntables in H0; the 933-2829 is an automated turntable with full track indexing.

While both can be operated in the DCC environment, the Walthers turntable is not DCC ready in the manner that you assume.

What appears to be a LocoNet connector is actually the connector for the turntable's proprietary controller.

Full documentation for this turntable is available at the Walthers web site.

Was this article helpful? Send us feedback!

Questions or Comments on this article? Please visit helpdesk.digitrax.com and submit a ticket. Please reference the KB article number in your ticket.