KB20: SE8C Output to LEDs

This article was last updated on Oct. 23, 2013, 10:25 a.m. | Print Article | Leave Feedback

Q:  What is the output voltage to the LED's and the inline resistor value.

A:  The typical output of the SE8C ranges between 4.5 and 5.0 volts DC; it varies a bit depending on conditions.

The signal mast base kit (SMBK) and the terminal strip mounting kit (TSMK), both have 100 ohm resistors built into the base.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.