KB141: Wiring Harnesses

This article was last updated on Jan. 10, 2012, 3:56 p.m. | Print Article | Leave Feedback

I have numerous locomotives I wish to convert to DCC.

In order to spread the cost out over time I would like to install the connector/harness and add the decoder at a later date.

Is it possible to buy the connector/harness assembly separately?


Yes, there are several harnesses which are part of the Digitrax Easy Connect system

This System Included the:

DHWH - 9 pin to bare wires wire harness

DHDP - 9 pin dummy plugs to convert for analog operation

DHWHPS - 9 pin to DCC medium plug short harness 1"

DHWHP - 9 pin to DCC medium plug long harness 3"

DHAT - 9 pin harness with no-solder connections for Athern Standard Locomotives

Was this article helpful? Send us feedback!

Questions or Comments on this article? Please visit helpdesk.digitrax.com and submit a ticket. Please reference the KB article number in your ticket.