Search

Fits many 21MT equipped HO locomotives Digitrax 21-pin MT socket 1.0 Amp/2 Amps Peak 2 FX7 Functions, 300ma Output

Fits many Kato HO legacy locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output

New Series 7 Sound Decoders: SDXH187MT Sound Decoder.

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Digitrax 9-Pin Socket and PS-Harness Medium Plug with approximately.1.2" wires 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output

Fits many Kato HO legacy locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output 8 Ohm 26x16x9 mm box speaker w/330uF Capacitor

Fits Kato AC4400 or compatible HO locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output 8 Ohm 28 mm round speaker w/330uF Capacitor

Fits Kato FP40-PH or compatible HO locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output 8 Ohm 28 mm round speaker w/330uF Capacitor

Fits Intermountain N Scale FP7A with wired motors produced after Jan 2014 6 FX3 Functions 472” x 2.165” x .098” 11.98mm x 54.99mm x 2.4mm

The Santa Fe & Western is a small simple “out and back” track plan with a small yard. It has a continuous run mainline with two passing sidings allowing you to simulate a great deal of prototype operation. This Case Study concentrates on how to convert this layout from traditional DC to DCC operations. Please note, this case study was originally presented as part of the “Digitrax Big Book of DCC” and it has been reproduced here from that text. This study was originally presented as part of three chapters about DCC Installation based on different layouts. The other layouts discussed were the Norcross Southern and the Brandywine & Benedictine. It is recommended that you read these studies as well as some of the topics overlap.