Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts.
Q: What is the output voltage to the LED's and the inline resistor value. A: The typical output of the SE8C ranges between 4.5 and 5.0 volts DC; it varies a bit depending on conditions. The signal mast base kit (SMBK) and the terminal strip mounting kit (TSMK), both have 100 ohm resistors built into the base.
The 10-Pin Signal Mast Bases that are part of SMBK and used as test signals with the SE8C have two connections marked Aux Hi and Aux Lo (Pins 2 & 9). These connections are not currently implemented and are reserved for future use.
Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts.Making these circuit boards look like signals is easy, just paint the mast silver and the heads black (be sure not to cover the LED with paint), then add targets and hoods for a reasonable facsimile of a signal. Another option is to cut off the circuit board mast from the base and attach a signal from another manufacturer.