Product Support for: Mobile Decoders -> 1.5 Amp N Scale Mobile Decoder (DN163)

View the Product Page for the DN163

N scale sized wired decoder with 6 functions! 1.5 Amp/2 Amp Peak, 6 FX3 Functions@0.5 Amp

5 Articles Found for DN163

KB841 Zephyr - Functions

DCS50 Zephyr can control Functions F0 - F8. Most DCC mobile decoders have function outputs that you can use to control lamps, LEDs, sound, smoke generators and other on/off devices installed in your locomotives. Most locomotives made today come with a head light and sometimes with a rear light, too. With DCC, these are controlled by the decoder’s function outputs. You can also install additional DCC controlled lighting such as cab lights, Mars lights, ditch lights, rotating beacons and others on your locos. The addition of these functions can add to the fun and realism of your locomotives.You must have ...

KB840 Zephyr - Functions F0-F8

DCS50 Zephyr can control Functions F0 - F8. Most DCC mobile decoders have function outputs that you can use to control lamps, LEDs, sound, smoke generators and other on/off devices installed in your locomotives. Most locomotives made today come with a head light and sometimes with a rear light, too. With DCC, these are controlled by the decoder’s function outputs. You can also install additional DCC controlled lighting such as cab lights, Mars lights, ditch lights, rotating beacons and others on your locos. The addition of these functions can add to the fun and realism of your locomotives.You must have ...

KB887 Digitrax Decoder Installation For PROTO 2000 E8/E9 in HO Scale

This installation procedure is for the DIGITRAX DH163/DH123 decoder. Alternatively, you can use a Digitrax DN142 in this installation. If you use the DN140 the installation will require fewer engine modifications because of the smaller physical size of the decoder.Note any decoder of smaller physical size can be used in this installation.  DN135D, DN163, DZ123, DZ125, DZ143 are all possibilities. After removing the shell from the locomotive chassis, note the color and location of each of the various wires.  All connections must be soldered with rosin core solder and insulated with shrink tubing.We will locate the decoder in the forward ...

KB888 Installation of Digitrax Decoders in HO Scale Atlas RS1, RS3, RSD4/5

Many thanks to Bob Dattore for this application note!This app note details using a DN142 decoder for the installation.  This decoder is no longer in production but the following decoders would work as well:  DN135D, DN163, DZ123, DZ125, DZ143.  Any decoder that is small enough to fit could be used.The Problem:  Atlas RS1's (and RS3's & RSD4/5's) are hard to install Digitrax decoders in. There is no easy drop-in or light board replacement with back-emf capability.I have installed several Atlas Dual Mode decoders in these popular hard to fit narrow, low hood diesels with ease, by replacing the original light ...

KB366 Some Thoughts on Decoder Installations

There was a time when every mobile decoder installation was a custom installation. In those early days, we were just feeling our way along, trying to find ways to make the existing supply of decoders fit into locomotives which had been designed in a different era. Fortunately, things have changed along the way, and in many cases, the Digitrax Decoder Selection Guide will list your locomotive. But many locomotives are not listed because they are too new or are too generic for a special listing. So, from time to time, you will have to "wing it" just a bit to ...