Product Support for: Mobile Decoders -> 1 Amp N / HO Scale Integrated DCC Medium Plug Mobile Decoder (DN146IP)

View the Product Page for the DN146IP

Fits Many DCC-Ready N and HO Scale Locomotives

1 Articles Found for DN146IP

KB137 DN143IP/DN146IP - Installation Notes

Installation Notes: 1. Do not exceed the decoder’s 500mA total function output rating. 2. If you plan to use functions F1 (traditionally a green wire) or F2 (traditionally violet), the return, also called +Common or Lamp Common, should be made via a wire carefully soldered to the Common (or blue) pin indicated as shown in Figure1. 3. To use a function output with an inductive (coil) type load, you must install a kick-back suppression diode across the connections. If controlling a coil type load, such as an electromechanical relay or motor, shutting the device off can cause an inductive kick-back ...