KB879: Broadway Limited Locomotives F9-F12 with Digitrax

This article was last updated on May 16, 2012, 4:06 p.m. | Print Article | Leave Feedback

Function Controls F9-F12 Not Responding Properly on Broadway Limited Locomotives

Some Broadway Limited Locomotives use Functions F0-F12 when running in DCC mode. In some cases F9-F12 do not respond properly. To remedy this problem, simply reset the locomotive to the factory default setting per the Broadway Limited Instructions you received with your locomotive.

Note: F9-F12 are accessible on the DT400 & DT402 series throttles when used in conjunction with the DCS100 command station.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.