KB801: DS64 - Automated Routing

This article was last updated on May 24, 2011, 7:25 p.m. | Print Article | Leave Feedback

Automated Routing with DS64

 



Routes are a way of operating a preset combination of turnouts to predefined positions using a single Switch command.

Route tables hold the Switch Address and position information that make up the Route that operates when a single command is issued. The DCS100 Super Chief can store up to 32 individual routes that consist of a "Top" address and 7 additional turnout addresses and their positions.  The DS64 has a route table that can hold up to 8 individual routes that consist of a "Top" address and 7 additional turnout addresses and their positions.

Sensors can also be used with the DS64 to activate routes.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.