KB778: DT400 Series Throttle Turning Track Power On & Off

This article was last updated on May 24, 2011, 9:29 p.m. | Print Article | Leave Feedback



The track power indicator on your DT400 shows whether track power is on or off. If the track power indicator is lit then track power is on.



There is also a Track Power indicator on your command station.

To Turn Track Power On:

If the Track Power Indicator is not lit, turn track power on as follows:

1.  Press the PWR Key

2.  Press the Y + Key and the Track Power Indicator on your DT400 display and on your command station will come on solid. If the Track Power Indicator is blinking, press the Y+ Key again to make it solid and turn on track power.

To Turn Track Power Off:

1.  Press the PWR Key , then press the N - Key . The Track Power Indicator on your DT400 and on your command station will go off.

2.  Exit PWR mode by pressing the PWR Key again or by pressing any other key on the throttle to initiate the next throttle task.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.