KB765: DT402 & DT400 Series Throttle L (Left) & R (Right) Throttle Display

This article was last updated on May 25, 2011, 4:22 p.m. | Print Article | Leave Feedback



The DT402/DT402 series throttles have displays which give you information about the performance of your railroad.

The decoder address selected on the L Throttle is displayed on the bottom line of the LCD to the left of the Mode Indicator. The decoder address selected on the R Throttle is displayed on to the right of the Mode Indicator. The address can show as either the 2-digit or the 4-digit decoder address. If no address is selected the display will show “SEL.” If a 2-digit address is selected (00-127), the display will show two or three digits. If a 4-digit address is selected (0128 - 9983), the display will show all four digits including the leading zero.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.