KB724: Digitrax SoundFX Decodders on Conventional DC Power

This article was last updated on July 20, 2011, 4:27 p.m. | Print Article | Leave Feedback

Digitrax SoundFX decoders will automatically operate on smooth DC power unless analog mode conversion has been disabled. The sound will not start until approximately 5 volts is applied to the track.  Due to this characteristic of analog operation with a DCC decoder installed, the start up sound will not play.

Was this article helpful? Send us feedback!

Questions or Comments on this article? Please visit helpdesk.digitrax.com and submit a ticket. Please reference the KB article number in your ticket.