KB712: UT4 - Forward Brake Reverse Switch

This article was last updated on July 24, 2011, 12:50 p.m. | Print Article | Leave Feedback



Changing the Direction switch on the top left hand side of the UT4 from Forward (F) to the center Brake (B) position causes the loco to stop at the locomotive’s programmed deceleration rate. Changing quickly from ‘F’ to ‘R’ (Reverse) causes the loco to stop at the programmed deceleration rate, then reverse direction and accelerate at the locomotive’s programmed acceleration rate.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.