KB658: DT300 - SEL Selecting a Locomotive to Run

This article was last updated on July 31, 2011, 1:56 p.m. | Print Article | Leave Feedback

If a throttle knob does not have a locomotive address selected when you make the throttle active by turning or pressing the L or R THROTTLE knob or L/t or c/R (direction) key, a flashing “SEL” will appear in place of the locomotive address in the LCD display. This is a prompt for you to select a locomotive address on that throttle.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.