KB646: DT300 - L Throttle and R Throttle Address

This article was last updated on July 31, 2011, 2:20 p.m. | Print Article | Leave Feedback

 

The decoder address selected on the L THROTTLE is displayed on the bottom line of the LCD to the left of the Mode Indicator. The decoder address selected on the R THROTTLE is displayed to the right of the Mode Indicator.

The address can show as either the 2-digit or the 4-digit decoder address. If no address is selected the display will show “SEL.” If a 2-digit address is selected (00-127), the display will show two or three digits (25 is shown in the example). If a 4-digit address is selected (0128 -9983), the display will show all four digits including the leading zero (5234 is shown in the example).

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.