KB560: Broadway Limited F7 Loco-Which decoder fits?

This article was last updated on May 16, 2012, 3:03 p.m. | Print Article | Leave Feedback

Q: I have 2 Broadway non-sound F7 DC locos. I bought 2 DH163IP decoders for them. However the decoder is too large to fit into the 8 pin plug provided on the PC board in the loco.

A: We recommend a DZ143PS for those locomotives. They will fit in the space available. Don't be confused by the Z designation of this decoder, it is rated at a full 1 amp to run most HO locos but it is small enough to fit in Z scale locos.

Was this article helpful? Send us feedback!

Please let us know if this article was helpful to you.

Please leave a detailed message below.